https://youtu.be/xkn__E-INY0 This is the installation guide to install a new kitchen garbage disposal. If you have a leak coming from your garbage disposal, and want to fix or remove it, please check out our part 1 of our Garbage Disposal Comprehensive Guide: https://youtu.be/khAepTwgdTI titled “6 Reasons Disposal Leaks From Bottom (Causes & Fix), Garbage Disposal Comprehensive Guide Part 1” After watching this video, if you decide to replace an old disposal, that video will help you to remove it before installing the new one.
A new garbage disposal can cost as little as $50. The biggest savings comes from not hiring a plumber to handle the installation. Typically, the job takes a couple of hours, at an average cost of $100 per hour for a licensed plumber.
Read the installation instructions in the owner’s manual to identify the disposal parts and take a photo of the parts before your installation. We found that even if you follow all steps and all garbage disposal parts are in working order, a lot of times it is still confusing if you don’t understand the underlying design or if you still wonder why the instruction specifies certain steps/actions, especially if you are installing one for the first time. That is why we provide detailed explanation to ensure that your garbage disposal installation is a straightforward and successful process. If your new disposal and the old one are the same type, an alternative to watching our video is to take a few moments to familiarize yourself with all these parts before you jump into removing the old unit. Put them together in the correct order and try out the locking mechanism. Understanding how everything fits together ahead of time will make the job easier.
We started from comparing the 3-bolt design and EZ mount design and showed many layers of multiple components for both designs. Note not just the ordering of each component but also the direction it faces. Again, it is helpful to take a photo to save your time and give you confidence when you follow the installation instructions. We have shown the steps and demo the 3-bolt design and EZ mount design, but if you want to skip one of them and get faster into the type of garbage disposal you purchased, you may either click the Chapter index from the video descriptions on Youtube or see the quick URL link below:
3-bolt design installation instructions URL: https://youtu.be/xkn__E-INY0?t=133
EZ mount design installation instructions URL: https://youtu.be/xkn__E-INY0?t=326
Many types of garbage disposals begin to wear out after a number of years. You can get a longer warranty if you pay higher prices. So besides choosing a garbage disposal based on its size and horsepower, and matching them to your household’s needs, you also need to consider the price and warranty period. This video discusses some points for you to consider. Also be aware that when choosing a new disposal, some building codes require a dedicated outlet with certain amperage under the sink near the disposal.
Chapter Index
0:00 difference between 3-bolt design & EZ mount design
0:45 advantage & disadvantage 3-bolt vs EZ mount
1:25 take a photo since multiple layers
2:26 install 3-bolt design, remove snap ring
3:02 between flange & sink either putty or rubber ring
3:22 ordering: fiber gasket, backup ring, mounting ring, snap ring
3:53 tighten 3 bolts aligned to back up ring
4:17 optional knock out dishwasher plug
4:43 turn lower mounting ring to lock in place
5:26 install EZ mount design
5:54 multiple layers ordering & direction
6:14 guide hopper into mounting ring slot
6:46 clean old putty, apply new or install rubber ring
7:02 ordering: putty, fiber gasket, support ring, mount ring, cushion mount
7:37 test leak
8:15 install mount ring
8:35 how does cushion mount fit flange
9:14 align drain elbow, gasket
9:34 align hopper & mounting ring slot
9:54 turn mount ring to hold disposal
10:18 connect drain elbow
10:39 tighten mount ring to lock position
11:13 How to choose new garbage disposal with warranty?
Install 2 Types of Garbage Disposal, Step-by-Step Comprehensive Guide Part 2, , 3-bolt vs EZ mount https://twitter.com/RealGeniusAsian/status/1563720771523858433